Make a Selection:
| OEM P/N | Kenco P/N | Descrip | Qty | Bolt P/N | Thick | Width | Length | |
|---|---|---|---|---|---|---|---|---|
| Weld-In | 5031-G30-04 | US-5031G30-04M | UNI-SHANK, OEM 34.5" | 26 | ||||
| UT-87 | UNI-TIP W/ROLL PIN | 52 | ||||||
| SOS-1-8X | SHROUD, CUT | 52 | ||||||
| US-CRA | ||||||||
| Bolt-On | 5031-G30-04 | US-801-B2 | CR SHAFT, 7.5" SHAFT | 52 | ||||
| UT-87 | UNI-TIP W/ROLL PIN | 52 | ||||||
| SOS-1-338 | CUT SHROUD, 3.375 LONG | 52 | ||||||
| 1-7H8 | HEX BOLT W/JAMNUT, GR8 | 52 | ||||||
| OEM Style | 5011B04A & B | KB-04-A | UNI-TIP W/PIN,LOCK,WDG | 52 | ||||
| KB-04-TL | TIP LOCK | 52 | ||||||
| KB-04-W | TIP LOCK WEDGE | 52 | ||||||
| Pug Liners | 5031-G10A | K-5031-G10A | GATE OPENING LINER | 1 | ||||
| 5031-G11A | K-5031-G11A-700 | PUGMILL LINER, AK-700 | 12 | |||||
| 58-2H8 | HEX BOLT W/NUT 58X2GR8 | 24 | ||||||
| 5031-G12A | K-5031-G12A | BOTTOM LINER | 1 | |||||
| End Liners | 5031-G13 | K-5031-G13 | END LINER-AR 1/2 | 2 | ||||
| 58-2PB8 | PLOW BOLT W/NUT 5/8X2G | 14 | ||||||
| 5031-G14 | K-5031-G14 | END LINER, AR 1/2 | 2 | |||||
| 58-2PB8 | PLOW BOLT W/NUT 5/8X2G | 14 |