Make a Selection:
| OEM P/N | Kenco P/N | Descrip | Qty | Bolt P/N | Thick | Width | Length | |
|---|---|---|---|---|---|---|---|---|
| Weld-In | 5031-G30-04 | US-5031G30-04M | UNI-SHANK, OEM 34.5" | 24 | ||||
| UT-87 | UNI-TIP W/ROLL PIN | 48 | ||||||
| SOS-1-8X | SHROUD, CUT | 48 | ||||||
| US-CRA | ||||||||
| Bolt-On | 5031-G30-04 | US-801-A2 | CR ARM, 6.75" SHAFT | 48 | ||||
| UT-87 | UNI-TIP W/ROLL PIN | 48 | ||||||
| SOS-1-338 | CUT SHROUD, 3.375 LONG | 48 | ||||||
| 1-7H8 | HEX BOLT W/JAMNUT, GR8 | 48 | ||||||
| OEM Style | 5011B04A & B | KB-04-A | UNI-TIP W/PIN,LOCK,WDG | 48 | ||||
| KB-04-TL | TIP LOCK | 48 | ||||||
| KB-04-W | TIP LOCK WEDGE | 48 | ||||||
| Pug Liners | 5031-G11A | K-5031-G11A-700 | PUGMILL LINER, AK-700 | 12 | ||||
| 58-2H8 | HEX BOLT W/NUT 58X2GR8 | 24 | ||||||
| 5031-GE06 | K-5031-GE06-700 | PUGMILL LINER, AK-700 | 12 | |||||
| 58-2H8 | HEX BOLT W/NUT 58X2GR8 | 24 | ||||||
| 5031-GE05 | K-5031-GE05-700 | PUGMILL LINER, AK-700 | 2 | |||||
| 58-2H8 | HEX BOLT W/NUT 58X2GR8 | 4 | ||||||
| End Liners | 5031-G13 | K-5031-G13 | END LINER-AR 1/2 | 2 | ||||
| 58-2PB8 | PLOW BOLT W/NUT 5/8X2G | 14 | ||||||
| 5031-G14 | K-5031-G14 | END LINER, AR 1/2 | 2 | |||||
| 58-2PB8 | PLOW BOLT W/NUT 5/8X2G | 14 | ||||||
| Gate Liners | 5031-GE13A | K-5031-GE13A700 | PUG-GATE LINER, AK-700 | 3 | ||||
| 58-2FHSH | FLAT HEAD SOCKET HEAD | 16 |