Make a Selection:
| OEM P/N | Kenco P/N | Descrip | Qty | Bolt P/N | Thick | Width | Length | |
|---|---|---|---|---|---|---|---|---|
| Ctr Blade SE | 9W1375 | KCE-9W1375-41 | SE BLADE 980G/988B CTR | 2 | (3) 114-412PB8 | 1.250 | 12.000 | 60.000 |
| Ctr Blade DE | 9W1375 | KCE-9W1375-82 | B/O BLADE, A36 DE | 2 | (3) 114-412PB8 | 1.250 | 16.000 | 60.000 |
| End Blade DE | 1U0761 | KCE-1U0761-ATC | BOLT-ON EDGE, ATC | 2 | (3) 114-412PB8 | 1.250 | 22.000 | 10.500 |
| 1U0761 | KCE-1U0761-HD | END BLADE, HEAVY DUTYV | 2 | (3) 114-412PB8 | 1.250 | 22.000 | 10.500 | |
| 208-5177 | KCE-1U0761-HDLT | SPEC TC END BLADE | 2 | (3) 114-412PB8 | 1.250 | 22.000 | 10.500 | |
| 1U0761 | KCE-1U0761-HDTC | 980 CAT E.BLADE,EXTC | 2 | (3) 114-412PB8 | 1.250 | 22.000 | 10.500 | |
| Half Arrow | 4T6588 | KCE-4T6588-HAC | TC FAB H/A CTRBLD42B2L | 3 | ||||
| 4T6588 | KCE-4T6588-HAR | TC FAB H/A RH BLD42B2L | 1 | |||||
| 4T6588 | KCE-4T6588-HAL | TC FAB H/A LH BLD42B2L | 1 | |||||
| Heel Plates | 2V6563 | KCE-2V6563-162 | HEEL PLATE, BOLT-ON | 2 | (4) 1-3PB8 | 1.000 | 10.000 | 27.000 |
| 3V7918 | KCE-3V7918-238 | HEEL PLATE, WELD-ON | 2 | Weld-on | 0.750 | 15.000 | 27.000 | |
| Teeth | 9W1453 | T-9W1453RP3-TC | TOOTH, EXTREME SERVICE | 8 | ||||
| 3G9549 | T-6Y9459 | WASHER | 8 | |||||
| 6Y2527 | T-6Y2527 | PIN (WAS 1U1458) | 8 | |||||
| P/N X-ref | 1U1458 | T-6Y2527 | ||||||
| 6Y3272 | KCE-1U0761-ATC | |||||||
| 6Y3273 | KCE-1U0761-ATC | |||||||
| 9V5793 | KCE-2V6563-162 | |||||||
| 6Y3609 | KCE-2V6563-162 |