Make a Selection:
| OEM P/N | Kenco P/N | Descrip | Qty | Bolt P/N | Thick | Width | Length | |
|---|---|---|---|---|---|---|---|---|
| Uni-Mix | US-106 | UNI SHANK | 36 | |||||
| UT-67 | UNI-TIP W/ROLL PIN | 36 | ||||||
| SOS-8 | UNI-SHROUD | 36 | ||||||
| 1-7H8 | HEX BOLT W/JAMNUT, GR8 | 36 | ||||||
| OEM Style | 10522 | KT-575-L | TIP, HD RADIUS LH | 20 | ||||
| 10521 | KT-575-R | TIP, HD RADIUS RH | 16 | |||||
| 34-3H8 | HEX BOLT W/NUT 3/4 X | 72 | ||||||
| Pug Liners | 12039 | 245-1375-L | PUGMILL LINER | 2 | ||||
| 12038 | 245-1375-R | PUGMILL LINER | 2 | |||||
| 12021 | 245-1375-S | PUGMILL LINER | 16 | |||||
| 12022 | 26-475 | PUGMILL LINER | 2 | |||||
| 01036 | 38-6-AR | PUGMILL LINER, AR | 5 | |||||
| 58-4H8 | HEX BOLT W/NUT 58X4GR8 | 24 | ||||||
| 58-212H8 | HEX BOLT W/NUT, GR 8 | 20 | ||||||
| 58-2FHSH | FLAT HEAD SOCKET HEAD | 8 | ||||||
| Seal Collar | 10015 | K-9080 | SEAL COLLAR HALF | 8 | ||||
| 1-6H8 | HEX BOLT W/JAMNUT, | 8 | ||||||
| End Liners | 01035 & 01032 | K-01035-32AR | PUGMILL END LINER-AR | 4 | ||||
| 01033 & 01030 | K-01033-30AR | PUGMILL END LINER-AR | 4 | |||||
| 01034 & 01031 | K-01034-31AR | PUGMILL END LINER-AR | 4 | |||||
| 58-2PB8 | PLOW BOLT W/NUT 5/8X2G | 56 | ||||||
| Gate Liners | 12006 | K-6000-GA | GATE ASSEMBLY | 1 | ||||
| 12074 | K-12074 | PUGMILL GATE LINER | 2 | |||||
| 12075 | K-12075 | PUGMILL GATE LINER | 2 | |||||
| K-6006 | GATE WEAR BAR | 2 | ||||||
| 58-2H8 | HEX BOLT W/NUT 58X2GR8 | 12 | ||||||
| 12-112FHMS | FLAT HD MACH. SCREW | 4 | ||||||
| P/N X-ref | 10511 & 10512 | UT-67 | ||||||
| 401324 & 401325 | UT-67 | |||||||
| 4631H/B1-R | UT-67 | |||||||
| 407322 & 407323 | UT-67 | |||||||
| 11026 & 11027 | US-106 | |||||||
| 4090ER,L | US-106 | |||||||
| 40119 & 40120 | US-106 | |||||||
| 401105 & 401106 | US-106 | |||||||
| 9080-A | K-9080 | |||||||
| 4090-A | 245-1375-S | |||||||
| D90033-0A,B | 245-1375-L,R | |||||||
| 4090-AB | 26-475 | |||||||
| 10521 & 10522 | UT-67 |